Search results

  1. LARRY70GS

    i could use a detailed repair manual on 1967 riv.
  2. LARRY70GS

    71 Skylark oil pan

    TA is working on an HP oil pan for the 350, but that may be a ways off. If you join over at you will have no problem finding a used one in Parts Wanted.
  3. LARRY70GS

    65 skylark convertible

    This what you really need, cheap because it's worn, but it looks all there...
  4. LARRY70GS

    65 skylark convertible

    You need to post a picture. Also, head over to Lots of very knowledgeable guys over there specific to 60's and 70's Buick cars.
  5. LARRY70GS

    1969 Buick Skylark coolant bottle replacement? My bottle is leaking

    You can probably find some used ones over at They won't be as pretty, but they won't leak either. The Olds unit might not fit the Buick fender well area.
  6. LARRY70GS

    How to remove hose on intake?

    You're Welcome.
  7. LARRY70GS

    1998 Riviera stalls at low speeds (highway speeds no issues)

    The crank sensor requires that the harmonic balancer be removed. Then it's a simple bolt on bolt off. You'll need a balancer puller to get it off. The MAF can be checked with a scan tool. The MAF tells the computer how much air is entering the engine, and the computer uses that information...
  8. LARRY70GS

    Removing 96 Riviera front seats

    Ask over at Riviera Performance That entire site is for 95-99 Riviera. Someone over there will know.
  9. LARRY70GS

    Wiring for power seats

    You'll need an 84 Chassis Manual for that. They come up on EBay. This one is too much, I have seen them for more reasonable prices,
  10. LARRY70GS

    1998 Riviera stalls at low speeds (highway speeds no issues)

    Crank sensor can do that as well. I would not replace the fuel pump, I would monitor fuel pressure and see what it does when stalling. Usually fuel problems manifest as a slow stall, not instant like ignition. A crank sensor will not light the CEL.
  11. LARRY70GS

    Cam problems

    Maybe it isn't machined correctly. Back to Comp cams.
  12. LARRY70GS

    Cam problems

    So you are saying the cam goes in too deep and the lifter faces DO NOT align with the lobes? How does it compare to the cam you took out, appearance wise, length?
  13. LARRY70GS

    Cam problems

    What engine?
  14. LARRY70GS

    i could use a detailed repair manual on 1967 riv.

    You can easily get the manual from a number of places, Oh, and a 2bbl carburetor is NOT stock on a 1967 Riviera. The stock engine is a 430 with a Quadrajet. Some later 455's might...
  15. LARRY70GS

    1995 Buick Riviera Temperature Gauge

    This is a steal, IMO, these manuals are not optional, you must have them if you intend to keep and work on the car. Rockauto has the sensors...
  16. LARRY70GS


    Well then click forgot my password or re register with a different screen name.
  17. LARRY70GS


    If anyone can help you, it would be the guys over at Riviera Performance The entire site is dedicated to the 1995-99 Buick Riviera.
  18. LARRY70GS

    350-4 not running right

    I wrote this thread on V8 back in 2005, Power Timing your Buick V8 All you need is a set of light advance springs and an adjustable vacuum advance canister. Crane makes a nice kit, Crane Cams 99601-1: Adjustable Vacuum Advance Delco Point Type | JEGS This spring kit also comes with a...
  19. LARRY70GS

    350-4 not running right

    You're welcome. The owner and administrator of the board is Jim Weise. Let me know if you need help registering. Jim built my engine in my GS. I can easily get in touch with him to assist you in registering. For your car, there is no better bulletin board than V8buick.
  20. LARRY70GS

    350-4 not running right

    I can tell you that your carburetor probably needs to be rebuilt at this point. The ethanol in the fuel will quickly swell the accelerator pump rubber, and possibly the rubber tip of the needle seat assembly. Fortunately, it is very easy to get a rebuild kit that has the good ethanol resistant...
Get your turbo buick badge right here!