Please help me identify these wires / connectors.

Joined
Jan 3, 2024
Messages
31
Reaction score
4
Points
8
Buick Ownership
2011 Buick Lucerne CXL
So I bought an Manual online and its proving to be quite no super useful for my application, and I can't get into the Chilton. Including a few photos first shows general area..second is close up. I've already repaired at least 10 wires and these are my next ones to repair thanks to pesky rodents. I had to hardwire in four independent high frequency rodent deterrence in my engine bay to prevent any further damage. Ai told me its the solenoid valve connectors, but when I look that up the solenoid valve seems to be on the opposite end of the engine. Although in the second picture you can see part of whatever wire that is sticking out there's also the connector part right next to it that's pretty much flush chewed off. I know I'm asking a lot thanks in advance do these two chewed connectors connect directly together? Any help appreciated.
 

Attachments

  • 20251224_142725.webp
    20251224_142725.webp
    134.5 KB · Views: 7
  • 20251224_142718.webp
    20251224_142718.webp
    156 KB · Views: 7
  • 20251224_140644.webp
    20251224_140644.webp
    250.4 KB · Views: 7
Here's a wiring schematic app, it's free. As a FYI Charm is also free, not sure what one you purchased.


Screenshot_20251225-170710_Carmin.webp
 
______________________________

Help support this site so it can continue supporting you!
Back
Top