diy

Hi all, I recently replaced all 4 rotors and pads on my '14 Regal GS and felt a vibration in the front during braking, especially from highway speeds. Initially thought it was bad bushings (car has 120,000 miles), and while the bushings were worn, mechanics said they do not need to be replaced...

Back in January 2021, my car started stuttering slightly as I accelerated up hills. This would go away and come back periodically until it got much worse very quickly and would start to stutter and shake violently anytime I accelerated and was losing power. I ended up taking it to the...

Hey guys. i just made a profile and signed up to reach out to all of you. IDK if i am in the rite thread but i will just cut to the chase. I have a 2006 buick lacrosse with i think a 3.8l?? well i left the inspection station unhappy with a nice rejection sticker. They said the lower motor mount...

Decided to re-do the sagging headliner in my 2001 LeSabre Custom, but upon removing all the bolts and disconnecting the necessary cables I found one in the back that doesn't have a means of unplugging (see pictures). How do I disconnect this last bit? Seems like it keeps running into the bumper...

Here is a great video detailing the procedure on how to replace the blend door actuator on a 2004 Buick Lesabre custom with manual AC controls. Hope it helps! 2004 Buick Lesabre blend door actuator replacement - manual controlled single zone AC

So for the third time my Ignition Control Module went out and im tired of towing it to my mechanic and want to fix it myself. (its been about almost 2 weeks since i have driven it) My Engine Control Module is out of whack as well and im wondering is that why my ICM keeps going out :/ Is there...