2013 Lacrosse stabilizer bar front

[SFLLACRDRIVER]

Any write ups or steps out there for changing the front stabilizer bushings on a 2013 Lacrosse with a 3.6. According to Chilton, the whole bar needs to come off "The stabilizer shaft insulator is not serviced separately, but with the stabilizer shaft." is this accurate? Chilton also states "Lower the rear of the drivetrain and front suspension frame to gain enough clearance to remove the front stabilizer shaft. " but only gives instructions on lowering completely. Any info on which items need to be removed/loosened and which don't? Any help is appreciated.