93' blend door actuator trouble?

[Jupiter43]

Hello, my constant threads are probably getting annoying now, but anyway, on my 93 park ave ultra, I have cold air on driver side and hot on passenger. It's like 3 degrees right now in Connecticut so yeah this kinda sucks. I've looked around at other posts, however none of them apply to the 91-93 models, so I just want to make sure I get the right part...

Also, a quick location of where it's located within the car would be SUPER helpful.

Honestly I thank all of you so much, I wouldn't have gotten this far without you all!

 

[rnbjr]

I changed one last year on my 94 Buick Park Ave. It was GM part# 16141822 GM OEM Actuator AC/Heater Temp Valve for GM Cars 92-99 Full Size. Found it new on ebay for 68 dollars. It's under the dash toward the glove box and relatively easy to change using I think 7mm- 1/4 inch drive regular and deep socket with ratchet and short screwdriver handle. Have a magnet handy (or magnetic socket) and a mirror and light could help to avoid losing the screw which I think there were 3. The gear inside cracked on mine which caused it to slip on the shaft and I had cold air on the passenger side and normal on the drivers.