disc player wire harness information

[COADY]

I HAVE A 95 RIVI AND I'M REPLACING THE STEREO SYSTEM AND I REMOVED THE DISC PLAYER. THERE IS 2 WIRE HARNESSES. ONE HAS 3 WIRES AND THE OTHER HAS AN 18 PIN CONNECTOR. I'M PUTTING A EQUALIZER IN ITS PLACE. ANYONE HAVE ANY IDEAS THE WHERE A BOUTS THESE WIRES GO TO? I COULDN'T FIND A WIRE SCHEMATIC. I WAS JUST GOING TO LEAVE THEM UNPLUGGED, BUT DIDN'T KNOW IF THEY HAD ANY IMPORTANCE TO THE REST OF THE ELECTRICAL CIRCUIT. THEY BOTH PLUGGED INTO THE BACK OF THE DISC PLAYER.

 

[LARRY70GS]

The only place you will find that info is in the Buick Chassis Manual for the 95 Riviera.

 

[COADY]

The only place you will find that info is in the Buick Chassis Manual for the 95 Riviera.

larry to the rescue-AGAIN. THANKS LARRY!!!!!!!!!!!!!!

 

[COADY]

larry to the rescue-AGAIN. THANKS LARRY!!!!!!!!!!!!!!

LARRY DID YOU SEE MY OTHER MESSAGE WITH THE WIRING DIAGRAM? I HAD TO PURCHASE THE MITCHELL WIRING GUIDE FOR 95 RIVIERA. THIS IS WHAT I CAME UP WITH. SEE IF YOU SEE ANYTHING THAT MAY NEED TO BE ADDRESSED PLEASE