Original Radio Harness

[saraguchi2316]

Hi All,

Recently my cousin attempted to install an aftermarket radio in my Buick LeSabre 1998.

To do this, he pulled out the wires and attempted to twist them around the wires from the aftermarket harness.

Needless to say, this was an epic fail.

I now see that you can just buy a wiring harness that just plugs into the original one but the problem is the other one is useless because he pulled out all the wires.

Any suggestions?

 

[saraguchi2316]

Hi All,

Recently my cousin attempted to install an aftermarket radio in my Buick LeSabre 1998.

To do this, he pulled out the wires and attempted to twist them around the wires from the aftermarket harness.

Needless to say, this was an epic fail.

I now see that you can just buy a wiring harness that just plugs into the original one but the problem is the other one is useless because he pulled out all the wires.

Any suggestions?

I decided to order the original radio harness and to attach it to the cut wires.

My question now is, if there are multiple wires of the same color, does it matter which wire I match it to as long as the color matches?