TPMS re-learn

[Foreleft44]

Hi,

Just installed new winter tires and rims on my 22 Envision Essence ST. For the life of me I cannot get the tpms to re-learn. Anyone else with this issue. I have read the manual and searched the web without success. Even the tire shop with their fancy tpms re-set machine did not work. Unless they installed the wrong sensors?

Thanks in advance,

Brent G. Prince Albert, Sask. Canada.

 

[MelsRegal]

Did you perform one of the two processes listed here?
Did they install a 315Mhz sensor?

TPMS Sensor Matching Process —
1. Auto Learn Function Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. When a tire is installed, the vehicle must be stationary for about 20 minutes before the system recalculates.
2. The following relearn process takes up to 10 minutes, driving at a minimum speed of 20 km/h (12 mph). A dash (-) or pressure value will display in the DIC. See Driver Information Center (DIC) 0 104. A warning message displays in the DIC if a problem occurs during the relearn process.

 

[Foreleft44]

Yes I tried those options with no luck. Looks like they installed a universal tpms that has the 315Mhz frequency capability. My guess is they programmed them to another frequency. Will go back to tire shop tomorrow.
Looking a bit more they may have installed the incorrect sensors.☹️

 

[MelsRegal]

Yes I tried those options with no luck. Looks like they installed a universal tpms that has the 315Mhz frequency capability. My guess is they programmed them to another frequency. Will go back to tire shop tomorrow.
Looking a bit more they may have installed the incorrect sensors.☹️

You cannt program a sensor to a frequency, only install the wrong frequency.