rotors

Does anyone know whether or not there's different size pads between the base and Turbo? I have the turbo and I'm looking for pads and noticing only one specifically says turbo (on rockauto) and happens to be 3x as expensive as any other ones even the gm genuine brand. Any input? I was originally...

Hello All, I have been a member here for about 2 months but this is my first post. I need to put new brake on the car, but cant seem to find any videos or threads on a how to video, anyone out there know a video or a how to link on how to replace pads and rotors? Thanks!

Suddenly hit with massive front end braking shakes. Could feel the brakes skipping and hitting the rotor so have spent the week downshifting to get under 20mph. Just replaced the rear drums, shoes, struts and put in Ni-Cu brake lines last summer as all were a rusted mess. So know the fronts need...

Wondering if you guys have ran into this. I just put new rotors and hawk HPS pads on the car last night, drove it about 30km and checked it this morning to find the following; it's an odd wear on the top side of the rotor (left and right both the same). It's being ground down on an angle... I...

I have a 60,000 mile LeSabre Custom that will need new pads and rotors in the next 3,000 miles or so. Looking for recommendations for what rotors and pads to install. According to my service records, the original rotors and pads lasted about 25,000 miles, the front rotors were then changed at...

I was changing the brakes on my 2002 Buick Regal LS and I took everything off like it was supposed to. Then I went to go put everything back on, but the rotor was loose. I looked around and discovered that it's fairly normal. I proceeded to put on the wheel, but the lug nut posts weren't coming...

I had this idea a few days ago (before the forum change) to start a thread with links to other threads in this forum that actually contain good info or pictures or part numbers. We'll call it a " ♚ Master Thread ♚ "! <-- (you can copy & paste that crown) I was looking for info on our brakes...