LG8 3100 SFI Camshaft?

[brodyajm]

Noticed a slight tick when firing up my ‘05 Century after an oil change, Figured I’d look into a set of roller lifters and a roller cam just to check cost. I can’t find a single thing! Any help would be much appreciated.

 

[ulycyc]

That's because the oil pump lost prime for a few seconds after the oil change. If you fill the new oil filter with oil before installing it will usually cure the problem.

 

[brodyajm]

That's because the oil pump lost prime for a few seconds after the oil change. If you fill the new oil filter with oil before installing it will usually cure the problem.

Oh I always prime the filter, I’m just trying to find a camshaft lol. Found the roller lifters but I find it hard to believe that there’s no repro cam for this thing.

 

[MelsRegal]

Noticed a slight tick when firing up my ‘05 Century after an oil change, Figured I’d look into a set of roller lifters and a roller cam just to check cost. I can’t find a single thing! Any help would be much appreciated.

Before assuming it's a camshaft/lifter issue have you looked at the rocker arms?
I also can find no manufacturer making a camshaft. You would need to contact a custom grind manufacturer.