Replaced crankshaft position sensor and now getting P0601, P0606, U0107

[SteveButabi]

Before I replaced the crankshaft position sensor I had no check engine codes at all. Only issue I had was random having the car shutoff while driving for no reason so I decided to replaced the CPS. Now its giving me 3 does. P0601, P0606, U0107. Any thoughts? Is this because the CPS is now fine and showing a new issue or was maybe my old CPS just fine.

 

[HotZ28]

OBD-II Trouble Code: P0601 Internal Control Module Memory Check Sum Error

P0606 PCM / ECM Processor Fault Code

How to troubleshoot and repair a p0606 code which refers to a PCM Processor Fault. Also includes links to relevant forum topics on the code.

www.obd-codes.com

U0107 Lost Communication with Throttle Actuator Control (TAC) Module

Clear the codes & see if they come back.

 

[SteveButabi]

OBD-II Trouble Code: P0601 Internal Control Module Memory Check Sum Error

P0606 PCM / ECM Processor Fault Code

How to troubleshoot and repair a p0606 code which refers to a PCM Processor Fault. Also includes links to relevant forum topics on the code.

www.obd-codes.com

U0107 Lost Communication with Throttle Actuator Control (TAC) Module

Clear the codes & see if they come back.

I have cleared the codes a couple times. They keep coming back.

 

[LeviKragt]

I just replaced my ECM on this code and it seems to have finally solved it.

Replaced the gas pedal, MAF, and tb prior to that.

Wiring didn't look bad either. It was a debilitating issue.