Wanted Roadmaster Parts Needed 1996

bzzroost

New member
Joined
Nov 2, 2022
Messages
10
Reaction score
1
Points
3
Buick Ownership
1996 Roadmaster wagon
Aloha from Hawaii.... looking for the following parts - 1996 Roadmaster
drivers' side front door larch and handle
passenger side rear electric window motor
Headlight/Dashboard pull switch
Would love new round, hood ornament with Buick Logo

Also - need instruction - steel brake line broke under car; repaired but cannot reset ABS warning brake sensor light. In Hawaii I will fail the safety check if we cannot find a work around for this. BTW - the master cylinder assembly is fine.... no leaks in brake system...
 
Aloha from Hawaii.... looking for the following parts - 1996 Roadmaster
drivers' side front door larch and handle
passenger side rear electric window motor
Headlight/Dashboard pull switch
Would love new round, hood ornament with Buick Logo

Also - need instruction - steel brake line broke under car; repaired but cannot reset ABS warning brake sensor light. In Hawaii I will fail the safety check if we cannot find a work around for this. BTW - the master cylinder assembly is fine.... no leaks in brake system...
Hello Bzzz, have a hood ornament in good condition from a '95, can send you a picture. You can have it for the cost of shipping if you like.
 
Hello Bzzz, have a hood ornament in good condition from a '95, can send you a picture. You can have it for the cost of shipping if you like.
Sooo very solar for delay... yes, please send photo... can you do that on this site? It looks there are two, each different from and back?
 
______________________________

Help support this site so it can continue supporting you!
This is the one I have, same front and rear, not new, but good usable condition.
Came off a 1995 Wagon.
 

Attachments

  • IMG_1333.webp
    IMG_1333.webp
    61 KB · Views: 2
  • IMG_1334.webp
    IMG_1334.webp
    54.3 KB · Views: 2
hmmmmm... I'll be at my car this weekend, it's on Big Island... I'll take a picture and measurement and send back to you.

Yours is really nice... I appreciate you..

Susan
 
Keep in mind, the '96 should have the "Collectors Edition" emblem, which is different from the earlier models!
 
______________________________

Help support this site so it can continue supporting you!
Keep in mind, the '96 should have the "Collectors Edition" emblem, which is different from the earlier models!


Aloha, here are the photos from this past weekend.....

The metal circle/disc is between 2.25" - 2.5" depending how measured... one ca see how the glue disintegrated and they fell off.....

Shoot! I cannot post them -- too big!!?? How to change size??

Susan
 
Aloha, here are the photos from this past weekend.....

The metal circle/disc is between 2.25" - 2.5" depending how measured... one ca see how the glue disintegrated and they fell off.....

Shoot! I cannot post them -- too big!!?? How to change size??
OK I've made a screenshot.. maybe this will work... Otherwise, maybe just please send them to me?? I do see on the paperwork they call this car a Collector's edition"....1000022124.webp1000022122.webp

Susan
 
This is a (not perfect) PIC of my collectors edition that you may want to search for.
1757746308391.webp
 
The pictures I posted are all that I have, 2 3/8" diameter.
From a 1995 wagon.
You pay shipping.

I am not a dealer or reseller, just trying to help out. ---Bert
 
______________________________

Help support this site so it can continue supporting you!
Back
Top