Running Torque app. getting some promising fault codes

[NewTekBuzz]

So, as some of you know... I have a "Lemon"!
I have picked up a OBD2 scanner and the Torque app in hopes that I can snag some real time fault codes. I have constantly received the same fault code 4 times in a row...
when I requested a DVR for my car I was told by GM that the DVR's would not work on my car.
based on my findings I now believe GM was chasing the effect of the problem and not the cause.
my fault code is "P0302 Powertrain Cylinder 2 Misfire Detected". I will spend some time this weekend looking around under the hood. my hope is that it may just be a bad plug or coil pack. if the plug looks good I will move the coil pack to a different cylinder to see if my fault code changes before replacing the $95 part. if the fault code jumps from cyl 2 to cyl 4 then I will change out the part and HOPE that all my problems are solved... fingers crossed.
I will keep you posted!!!

 

[NewTekBuzz]

Well.... put new plugs in and moved all the coil packs around, still getting misfire on cylinder number 2. Any ideas on what I should check next.... injecters? I think fuel rail is under manifold.....

 

[FatherDeth]

Hopefully this is not the case, but when I got repeated misfire codes on my old MINI Cooper S, it was due to a bad piston.

 

[Sonny@bnr]

Do a compression check

 

[NewTekBuzz]

Only happens when it's cold and only happens for about 3 seconds.

 

[NewTekBuzz]

Do a compression check

this is beyond my ability... im talking to ZZP here in michigan, maybe they will be able to track this problem down!

 

[NormT]

Cylinder back #2?

 

[NewTekBuzz]

Cylinder back #2?

Norm... what are you asking?