2022 Buick Envision won’t start up

[EnvistaBuick]

Hello guys!
I have had this Envision that I bought from auction around 4-5 months ago. It was starting up and running/driving fine. I put a tender in the jumping tab and the ground in the strut, just to keep the battery charged. All was fine, I was turning on every week or so. But I haven’t turned it on in about 2-3 weeks, probably a month. Today I tried, it started it up but suddenly turned off. Every time I try, it starts but after 1-2 seconds it will off. Also I have notified this buzzing noise in the front (watch the video) which have been making it since I bought it. Any idea? I disconnected the battery to see if it will help but this might not be the issue.
Thanks

 

[afireinside7710]

I'd guess the high pressure fuel pump is bad/dying. Do you have a CEL?

 

[EnvistaBuick]

I'd guess the high pressure fuel pump is bad/dying. Do you have a CEL?

Oh yep! But it is crashed… but I might run a test with a scan tool to see if any thing wrong with the fuel pump.

 

[EnvistaBuick]

I'd guess the high pressure fuel pump is bad/dying. Do you have a CEL?

I received a letter from Buick about a recall for the fuel pump module.

 

[EnvistaBuick]

I'd guess the high pressure fuel pump is bad/dying. Do you have a CEL?

Here is the code and the fuel light on

 

[Jays Avenir]

put a fuel pump power module in it ...veryyyyyyyy common failure, causing crank no start!!
you may even have a recall for it and would be covered!

 

[EnvistaBuick]

put a fuel pump power module in it ...veryyyyyyyy common failure, causing crank no start!!
you may even have a recall for it and would be covered!

Does anyone know how to reprogram the module? I have an Autel Scan Tool, but i think I need a laptop (i have), to buy the GM software (I dont know which one exactly), and few more things, thats why Im asking. I know recalls are free, but this is a car bought in auction so still I need to repair it, register it to put it on the road, and I cant move it now from my driveway, so I bought the module ($55) and just need to find the right procedure to reprogram it.
Appreciate any help

By the way, I have a lot of documentation from ALLDATA in case you guys need anything. I found few things about the Fuel Pump Module but not sure if there is something missed in the reprogramming part.

 

[Jays Avenir]

they dont require programming. plug and play.
Im a tech at a gm dealer. if any questions shoot me a message!! i can check if its covered as well under any policies- dm me if you want

 

[EnvistaBuick]

they dont require programming. plug and play.
Im a tech at a gm dealer. if any questions shoot me a message!! i can check if its covered as well under any policies- dm me if you want

You are going to kill me but I cant find a link/button to send you any DM even looking at your User Profile. Not sure why. Can you send me a DM?